Audio Product



8″ Two-Way Powered Studio Monitor

Bi-amplified Studio Monitor with Magnetically-Shielded 8” Low Frequency Transducer and 1” Soft-Dome High Frequency Transducer and Image Control Wave Guide. Class-D 56 Watt RMS Amplifier for LF, and 56 Watt RMS Amplifier for HF. Balanced XLR and ¼” TRS Inputs with Detented Level Control, HF and LF Trim Controls.
  • WAVEGUIDE – The specially designed Image Control Waveguide enhances imaging and optimizes the blend of direct and reflected sound in the room, ensuring neutral sound at the mix position.
  • POWER INDICATOR – Illuminates when power is connected and the POWER SWITCH is set to ON. Note after setting the power switch to ON, there is a short delay prior to illumination of the LED.
  • LOW FREQUENCY TRANSDUCER – Reproduces low frequency content of the input signal.
  • DUST DOME – Protects the inner circuit of the woofer. This self-repairing dust dome is resistant todents caused by fingers and objects.
  • LOW FREQUENCY PORT – The patented Slip Stream™ Port works in conjunction with the low frequency transducer to provide accurate low frequency performance.

  • INPUT PANEL – Includes input connectors, power connector and user controls.
  • PADS – Pads supplied with each monitor are user-installed.
  • HIGH FREQUENCY TRANSDUCER – Reproduces high frequency signals.
Frequency Range 37Hz – 24khz
Max Peak SPL 112 dB SPL C-Weighted
Max Peak Input +23 dBu
LF Driver Size 203 mm (8″)
HF Driver Size 25 mm (1″)
LF Driver Power Amp 56 W Class D
HF Driver Power Amp 56 W Class D
LF Trim Control +2 dB, 0, -2 dB
HF Trim Control +2 dB, 0, -2 dB
Input Types 1 x XLR, 1 x TRS Balanced
AC Input Voltage 100-240 VAC +/- 10% 50/60 Hz
Dimensions (H x W x D) 419 mm x 254 mm x 308 mm (16.5 in x 10 in x 12.1 in)
Weight 8.6 kg (18.9 lbs)